Powder Paint - Dark Sand (Coarse-grained) - 80gr

Powder Paint - Dark Sand (Coarse-grained) - 80gr

An environmentally friendly coarse-grained dark sand powder paint which is fantastic and incredibly easy to use and it gives an extremely durable finish with a unique application process intended for all types of metal. The powder paint is cured by a heat cycle. Basic procedure is to dip the heated item in the powder. The heat causes a thin layer of powder to adhere to the workpiece and flow in as a smooth and extremely hard coating. If a smooth surface is desired, it is necessary to heat the item again. Be careful not to overheat. The right temperature is important to prevent the powder paint from boiling and burning. A coat of powder paint gives the item complete coverage without the need for white primer or base coat. It's that simple!

Powder Paint Dark Sand (Coarse-grained) 80gr:
* Textured / Smooth surface.
* No drying time.
* Non-flammable.
* Environmentally friendly.
* No smoke or smelly fumes.

The Heat & Dip method: Hold the item with pliers, heat it with a heat gun (works best), or over an open fire for about 5-10 seconds. Dip and then swipe the item through the powder paint for about 4-6 seconds.If necessary, knock off excess powder on the edge of the bottle. If the item seems a little powdered and dry, increases the preheating time. The subject is dry in just a moment. Always remember to shake the bottle with the powder paint before use, also between paints, as the powder will set and pack a little over time. All coarse-grained powder paint can be mixed with each other. Dip the item in the first color, then reheat the item for a few seconds to even out the paint and then dip the item in the second color.

Please note: Coarse grained powder paint can not be used in Fluid Bed.

For maximum durability, then hang the item in an oven for about 10 to 15 minutes at (180 ° C) to cure to a rock hard surface.

The technique of using powder coating can take a few tries to achieve the desired finish.
But with a little practice, you will save time and money while creating a product of the highest quality.

Please note: The final color of some of the powder coatings does not look like the color in the bottle.
As the heat curing process causes it to change color to the appropriate final color.
Always store the powder paint below 28 ° C!